+15 How To Relight Pilot Light On Gas Water Heater 2022. On most hot water heaters. Hold down the "pilot" button:
How to Reignite Your Water Heater's Pilot Light Mr. Rooter from www.mrrooter.ca
I can only answer for the model of natural gas water heater that i had. Typically, this will be under the gas valve. So, the pilot light keeps the thermocouple warm, which keeps the gas flowing.
Turn The Gas On/Off Pilot Switch To The "Pilot" Position.
Press and hold the control knob to let the gas flow into the pilot light. Switch the gas knob to "on": If you have a voltmeter, make sure that power is reaching the heater.
Now The Pilot Light Stays Lit And The Burner Will Light When I Initially Relight The Pilot But The Burner Burns Out After A Couple Minutes And Will Not Relight
A lot of modern appliances now operate via electronic ignition. Then set your gas valve towards "pilot" mode. (if the gas valve does not push down, look for a red control button near the valve and hold this button down.) while holding down the pilot gas valve, or.
The Knob Should Be Labeled In A Clear And Understandable Manner.
Remove your foot from the gas pedal. If your model has a button for pilot mode, hold it down. How to relight a pilot light on a gas water heater.
Always Be Careful When Working With Gas Appliances.
I stopped having hot water about a week ago. Use either a lighter, match or candle to provide the flame required to relight the pilot light. Locate the pilot light access point.
You Might Just See The Light Kick On.
If it has not, rotate the valves and knobs to their original settings and return to step 1. You can get replacement parts on amazon if you need them. Turn the gas valve to "pilot" and press down.
